Raspberrypi - Revision history

Porcelinux: /* config */

2024-02-07T20:25:45Z

config

← Older revision		Revision as of 20:25, 7 February 2024
Line 79:		Line 79:

	audio_pwm_mode=2		audio_pwm_mode=2

			== HDMI audio ==

			in config.txt, this lines will force the audio output to the analog jack
			dtparam=audio=on
			audio_pwm_mode=2
			hdmi_ignore_edid_audio=1
			disable_audio_dither=1

	= software =		= software =

Porcelinux: /* config */

2024-02-07T20:21:43Z

config

← Older revision		Revision as of 20:21, 7 February 2024
Line 69:		Line 69:
	= config =		= config =

	* DSI lines		== DSI lines ==
	DSI lines are disabled by default. To enable detection, add the following line to /boot/config.txt:		DSI lines are disabled by default. To enable detection, add the following line to /boot/config.txt:

	ignore_lcd=0		ignore_lcd=0

			== 3.5mm jack output sound ==

			If using the Raspberry Pi 3.5mm jack to output sound, sound quality can be improved by adding the following line to your boot/config.txt file:

			audio_pwm_mode=2

	= software =		= software =

Porcelinux: /* software */

2022-07-07T15:50:07Z

software

← Older revision		Revision as of 15:50, 7 July 2022
Line 79:		Line 79:
	or		or
	sudo apt-get install florence		sudo apt-get install florence

			== Raspbian 11 ==

			=== LAn iface names ===

			iface names are renamed to enx???? .... very bad

			* in /boot/cmdline.txt
			net.ifnames=0 biosdevname=0

Porcelinux at 15:07, 21 July 2021

2021-07-21T15:07:17Z

← Older revision		Revision as of 15:07, 21 July 2021
Line 69:		Line 69:
	= config =		= config =

			* DSI lines
			DSI lines are disabled by default. To enable detection, add the following line to /boot/config.txt:

			ignore_lcd=0

	= software =		= software =
	* on screen keyboard		* on screen keyboard
	apt-get install matchbox-keyboard		apt-get install matchbox-keyboard
			or
	* DSI lines		sudo apt-get install florence
	~~DSI lines are disabled by default. To enable detection, add the following line to /boot/config.txt:~~

	~~ignore_lcd=0~~

Porcelinux at 14:56, 21 July 2021

2021-07-21T14:56:16Z

@@ Line 5: / Line 5: @@
-* casting to a raspberry
+= casting to a raspberry =
   apt-get install libwidevinecdm0
-*; installing 3.5 Display
+= installing 7 Display =
 there are various models of the same 3.5 display, two are listed here
@@ Line 36: / Line 66: @@
   cd LCD-show/
   sudo ./rotate.sh 90  .. 180  270

Porcelinux at 18:50, 11 July 2021

2021-07-11T18:50:24Z

← Older revision	Revision as of 18:50, 11 July 2021
Line 1:	Line 1:



		http://www.raspberrypi.org/documentation/configuration/config-txt.md

Porcelinux at 18:24, 11 July 2021

2021-07-11T18:24:51Z

← Older revision	Revision as of 18:24, 11 July 2021
Line 1:	Line 1:


		* casting to a raspberry

		apt-get install libwidevinecdm0

Porcelinux: Created page with " *; installing 3.5 Display there are various models of the same 3.5 display, two are listed here sudo rm -rf LCD-show git clone https://github.com/goodtft/LCD-show.git..."

2021-07-11T16:52:40Z

Created page with " *; installing 3.5 Display there are various models of the same 3.5 display, two are listed here sudo rm -rf LCD-show git clone https://github.com/goodtft/LCD-show.git..."

New page

*; installing 3.5 Display

there are various models of the same 3.5 display, two are listed here

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/

* MHS-3.5inch_RPi_Display

http://www.lcdwiki.com/MHS-3.5inch_RPi_Display

cd LCD-show/
sudo ./MHS35-show

* V3 3.5inch_RPi_Display

cd LCD-show/
sudo ./LCD35-show

* rotate display
cd LCD-show/
sudo ./rotate.sh 90 .. 180 270