Touchscreen
From Alessandro's Wiki
- installing IIyama multitouch screen:
- dmesg
usb 2-1.2: new full speed USB device number 22 using ehci_hcd usb 2-1.2: New USB device found, idVendor=0408, idProduct=3001 usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.2: Product: OpticalTouchScreen usb 2-1.2: Manufacturer: QUANTA
- lsusb:
Bus 002 Device 022: ID 0408:3001 Quanta Computer, Inc. Optical Touch Screen
hiding the mouse pointer
- in xorg.conf
Section "InputDevice" Identifier "dummy" Driver "void" Option "Device" "/dev/input/mice" EndSection
- and in the "ServerLayout" section:
InputDevice "dummy"
wacom-s
... # Synaptics Touchpad device Section "InputDevice" Identifier "touchpad" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" EndSection # wacom pen device Section "InputDevice" Driver "wacom" Identifier "stylus" Option "type" "stylus" Option "device" "/dev/input/tablet-tpc93-stylus" Option "USB" "on" Option "ForceDevice" "ISDV4"#Doesn't seem to be needed with option above # Without this, the button on the stylus won't work with newer linuxwacom Option "TPCButton" "off" # Make the stylus button a right-click Option "Button2" "3" EndSection Section "InputDevice" Driver "wacom" Identifier "eraser" Option "type" "eraser" Option "device" "/dev/input/tablet-tpc93-stylus" Option "USB" "on" Option "ForceDevice" "ISDV4"#Doesn't seem to be needed with option above EndSection # Wacom touchscreen Section "InputDevice" Driver "wacom" Identifier "touch" Option "type" "touch" Option "device" "/dev/input/tablet-tpc93-touch" Option "USB" "on" Option "ForceDevice" "ISDV4"$Doesn't seem to be needed with above option # Calibration for the touch screen (same options for above devices). Yours may vary and you should try without these first. Option "TopX" "1025" Option "TopY" "800" Option "BottomX" "25400" Option "BottomY" "15500" EndSection ... Section "ServerLayout" InputDevice "touchpad" "CorePointer" InputDevice "stylus" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" InputDevice "touch" "SendCoreEvents" ... EndSection