Difference between revisions of "Volumio"
Porcelinux (talk | contribs) |
Porcelinux (talk | contribs) |
||
Line 135: | Line 135: | ||
[[File:Raspberrypi-7inch-connections.png]] | [[File:Raspberrypi-7inch-connections.png]] | ||
in /boot/ | == rotation == | ||
in /boot/userconfig.txt (2 = 180degrees) | |||
#### Touch Display rotation setting below: do not alter #### | |||
display_lcd_rotate=2 | |||
display_hdmi_rotate=2 | |||
== Errors == | == Errors == |
Revision as of 08:06, 3 April 2022
Mount SMB/CIFS
- add to options:
vers=2.0
Enable ssh
default user:pass volumio:volumio
Mount points
Filesystem Type Size Used Avail Use% Mounted on /dev/mmcblk0p1 vfat 61M 57M 3.4M 95% /boot /dev/mmcblk0p2 ext4 2.2G 1.3G 854M 60% /imgpart
- the slash partition (where all the avail. space goes)
Filesystem Type Size Used Avail Use% Mounted on overlay overlay 464G 1.2G 439G 1% /
- a mount point
Filesystem Type Size Used Avail Use% Mounted on //NAS_IP/Public/Music cifs 2.8T 2.2T 545G 81% /mnt/NAS/Public
screen
work in progress
- touchscreen (after reboot)
touch display plugins in the plugin manager in volumio.local/plugin-manager and rotate
hdmi_cvt
https://www.raspberrypi.com/documentation/computers/config_txt.html#video-options
hdmi_cvt=<width> <height> <framerate> <aspect> <margins> <interlace>
Value | Default | Default |
width | (required) | width in pixels |
height | (required) | height in pixels |
framerate | (required) | framerate in Hz |
aspect | 3 | aspect ratio 1=4:3, 2=14:9, 3=16:9, 4=5:4, 5=16:10, 6=15:9 |
margins | 0 | 0=margins disabled, 1=margins enabled |
interlace | 0 | 0=progressive, 1=interlaced |
rb | 0 | 0=normal, 1=reduced blanking |
3.5 inch
- easy way
- in /boot/userconfig.txt
dtparam=spi=on dtoverlay=tft35a:rotate=90
- messy way
https://www.waveshare.com/wiki/3.5inch_DPI_LCD https://www.waveshare.com/wiki/3.5inch_RPi_LCD_(C)
another guide: https://community.volumio.org/t/volumio-with-3-5-tft-touch-screen-gpio-rpi-3b/11265
- rotate the display
in /boot/userconfig.txt
dtoverlay=tft35a:rotate=270
in /etc/rc.local
xinit /usr/bin/chromium-browser --no-sandbox --no-first-run --noerrdialogs --start-fullscreen --start-maximized --disable-notifications --disable-infobars --kiosk --incognito 127.0.0.1:3000 &
- in /etc/X11/xorg.conf.d/99-calibration.conf
Section "InputClass" Driver "evdev" Identifier "calibration" MatchProduct "ADS7846 Touchscreen" Option "Calibration" "268 3880 227 3936" Option "SwapAxes" "0" EndSection
5 inch display
http://www.lcdwiki.com/5inch_HDMI_Display
- in /boot/userconfig.txt:
(hdmi_cvt=<width> <height> <framerate> <aspect> <margins> <interlace>)
# means DMT (Display Monitor Timings; the standard typically used by monitors) hdmi_group=2 # indicates the resolution mode hdmi_mode=87 hdmi_cvt=800 480 30 6 0 0 0
7 inch display
- in /boot/userconfig.txt:
(hdmi_cvt=<width> <height> <framerate> <aspect> <margins> <interlace>)
hdmi_group=2 hdmi_mode=87 hdmi_cvt=1024 600 60 6 0 0 0
---
https://www.waveshare.com/wiki/7inch_HDMI_LCD_(C)
- connecting the display
rotation
in /boot/userconfig.txt (2 = 180degrees)
#### Touch Display rotation setting below: do not alter #### display_lcd_rotate=2 display_hdmi_rotate=2
Errors
Failed to load module +fbturbo (module does not exist, 0)
https://github.com/ssvb/xf86-video-fbturbo/wiki/Installation
My Volumio
even thought i've a subscription, I don't like the menu occupying space of the screen. A little hack can help. It will revert to the original on every update
in www3/styles/app-936d2e26fe.css
#main-menu .myvolumio-card-container { margin-top: 46px; display: none; }