Router-language: Difference between revisions

From Alessandro's Wiki
No edit summary
Line 3: Line 3:


=== enable ===
=== enable ===
* when logged in, the "enable" command give you the administration rights
<syntaxhighlight lang=visualfoxpro >
<syntaxhighlight lang=visualfoxpro >
$ enable
$ enable
Line 13: Line 15:
</syntaxhighlight>
</syntaxhighlight>


=== show interface brief ===
=== port status short ===
<syntaxhighlight lang=python >
ip dns server-address 195.169.98.130 195.169.98.169
</syntaxhighlight>
 
* show interface brief
* show interface brief
<syntaxhighlight lang=visualfoxpro >
<syntaxhighlight lang=visualfoxpro >
Line 28: Line 25:
ve10  Up      N/A      N/A  N/A  None  N/A N/A    0012.f286....     
ve10  Up      N/A      N/A  N/A  None  N/A N/A    0012.f286....     
</syntaxhighlight>
</syntaxhighlight>
 
=== MAC address table ===
  show mac-address
  show mac-address
<syntaxhighlight lang=visualfoxpro >
<syntaxhighlight lang=visualfoxpro >
Line 36: Line 33:
0011.7800.9a44  8            Dynamic    14232      200   
0011.7800.9a44  8            Dynamic    14232      200   
</syntaxhighlight>
</syntaxhighlight>
 
=== ethernet data flow statistics ===
* show rmon statistics
* show rmon statistics
<syntaxhighlight lang=visualfoxpro >
<syntaxhighlight lang=visualfoxpro >
Line 53: Line 50:
       512 to 1023              2001555        1024 to 1518            38655772
       512 to 1023              2001555        1024 to 1518            38655772
</syntaxhighlight>
</syntaxhighlight>
 
=== ethernet details ===
* show interface ethernet 1
* show interface ethernet 1
<syntaxhighlight lang=visualfoxpro >
<syntaxhighlight lang=visualfoxpro >
Line 82: Line 79:
</syntaxhighlight>
</syntaxhighlight>


 
=== ip routes ===
* show ip
show ip
<syntaxhighlight lang=visualfoxpro >
<syntaxhighlight lang=visualfoxpro >
Global Settings
Global Settings
Line 96: Line 93:
</syntaxhighlight>
</syntaxhighlight>


 
=== VLAN detail ===
 
* show vlans
* show vlans
<syntaxhighlight lang=visualfoxpro >
<syntaxhighlight lang=visualfoxpro >
Line 107: Line 103:
   Uplink Ports: None
   Uplink Ports: None
  DualMode Ports: None
  DualMode Ports: None
</syntaxhighlight>
=== virtual ethernet configuration ===
* is the ip configuration of the vlan subnet
<syntaxhighlight lang=visualfoxpro >
interface ve 300
port-name v-secondary
ip access-group 300 in
ip address 1.2.1.1 255.255.255.240
!
interface ve 100
port-name v-primary
ip address 1.2.3.1 255.255.252.0
</syntaxhighlight>
=== access list per IP ===
* access list used by virtual ethernet
<syntaxhighlight lang=visualfoxpro >
access-list 10 permit 1.2.3.0 0.0.3.255
access-list 10 permit 1.2.1.0 0.0.0.255
access-list 10 deny any log
access-list 300 deny ip any 1.2.3.0 0.0.3.255 log
access-list 300 deny ip any 1.2.1.0 0.0.0.255 log
access-list 300 permit ip any any
access-list 103 permit ip any 1.2.5.0 0.0.0.255
</syntaxhighlight>
=== set DNS ===
* add 3 DNS servers:
<syntaxhighlight lang=python >
ip dns server-address 1.2.3.4 10.11.12.13 101.102.103.104
</syntaxhighlight>
* del 1 DNS server:
<syntaxhighlight lang=python >
no ip dns server-address 10.11.12.13
</syntaxhighlight>
=== SSH management config ===
<syntaxhighlight lang=visualfoxpro >
ip ssh  key-authentication no
ip ssh  source-interface ve 200
</syntaxhighlight>
=== add port to VLAN ===
<syntaxhighlight lang=visualfoxpro >
* add tagged port:
# vlan 4
(vlan-4)# tag ethe 11
# end
* add untagged port
(vlan-4)# untag ethe 11
# end
</syntaxhighlight>
</syntaxhighlight>


=== remove port from VLAN ===
=== remove port from VLAN ===
 
<syntaxhighlight lang=visualfoxpro >
* remove un-tagged port:
* remove un-tagged port:
  vlan 4
  #vlan 4
  no untag ethe 11
  (vlan-4)# no untag ethe 11
  end
  # end
* tagged port
* tagged port
  no tag ethe 11
  (vlan-4)# no tag ethe 11
# end
</syntaxhighlight>

Revision as of 13:14, 29 February 2012

Foundry / Cisco IOS

enable

  • when logged in, the "enable" command give you the administration rights

<syntaxhighlight lang=visualfoxpro > $ enable

  1. config [te]

(config)# (config)# (config)# show running-config (config)# write memory

</syntaxhighlight>

port status short

  • show interface brief

<syntaxhighlight lang=visualfoxpro > Port Link State Dupl Speed Trunk Tag Priori MAC Name 1 Up Forward Full 1G None No level0 0012.f286.... 2 Disable None None None None No level0 0012.f286....

Port Link State Dupl Speed Trunk Tag Priori MAC Name ve10 Up N/A N/A N/A None N/A N/A 0012.f286.... </syntaxhighlight>

MAC address table

show mac-address

<syntaxhighlight lang=visualfoxpro > Total active entries from all ports = 69 MAC-Address Port Type Index VLAN 0800.270c.ce47 5 Dynamic 30 113 0011.7800.9a44 8 Dynamic 14232 200 </syntaxhighlight>

ethernet data flow statistics

  • show rmon statistics

<syntaxhighlight lang=visualfoxpro > Ethernet statistics 1 is active, owned by monitor

Interface 1 (ifIndex 1) counters
          Octets          62219423556
     Drop events                    0             Packets             74215428
  Broadcast pkts                  613      Multicast pkts                83808
CRC align errors                    0      Undersize pkts                    0
   Oversize pkts                    0           Fragments                    0
         Jabbers                    0          Collisions                    0
Packet size counters
              64              8199939           65 to 127             21283872
      128 to 255              2667477          256 to 511              1406813
     512 to 1023              2001555        1024 to 1518             38655772

</syntaxhighlight>

ethernet details

  • show interface ethernet 1

<syntaxhighlight lang=visualfoxpro > GigabitEthernet1 is up, line protocol is up

 Hardware is GigabitEthernet, address is 0012.f286.7e40 (bia 0012.f286.7e40)
 Configured speed auto, actual 1Gbit, configured duplex fdx, actual fdx
 Configured mdi mode AUTO, actual MDI
 Member of L2 VLAN ID 10, port is untagged, port state is FORWARDING
 BPDU guard is Disabled, ROOT protect is Disabled
 Link Error Dampening is Disabled
 STP configured to ON, priority is level0
 Flow Control is config enabled, oper enabled, negotiation disabled
 mirror disabled, monitor disabled
 Not member of any active trunks
 Not member of any configured trunks
 No port name
 IPG MII 96 bits-time, IPG GMII 96 bits-time
 IP MTU 1500 bytes, encapsulation ethernet
 300 second input rate: 262016 bits/sec, 119 packets/sec, 0.02% utilization
 300 second output rate: 1558744 bits/sec, 178 packets/sec, 0.15% utilization
 35819040 packets input, 31760156880 bytes, 0 no buffer
 Received 559 broadcasts, 83280 multicasts, 35735201 unicasts
 0 input errors, 0 CRC, 0 frame, 0 ignored
 0 runts, 0 giants
 38293277 packets output, 30371035971 bytes, 0 underruns
 Transmitted 53 broadcasts, 0 multicasts, 38293224 unicasts
 0 output errors, 0 collisions

</syntaxhighlight>

ip routes

show ip

<syntaxhighlight lang=visualfoxpro > Global Settings

 ttl: 64, arp-age: 10, bootp-relay-max-hops: 4
 router-id : 0.0.0.0
 enabled : UDP-Broadcast-Forwarding  Source-Route  Load-Sharing  RARP  
 disabled: Route-Only  Directed-Broadcast-Forwarding  IRDP  Proxy-ARP  RIP  DVMRP  VRRP  VRRP-Extended  

Static Routes

 Index   IP Address        Subnet Mask       Next Hop Router   Metric Distance
 1       0.0.0.0           0.0.0.0           145.145.24.140    1      1 0
 2       192.168.251.0     255.255.255.0     192.168.252.1     1      1 0

</syntaxhighlight>

VLAN detail

  • show vlans

<syntaxhighlight lang=visualfoxpro > Total PORT-VLAN entries: 19 Maximum PORT-VLAN entries: 4095 PORT-VLAN 1, Name DEFAULT-VLAN, Priority level0, Spanning tree Off

Untagged Ports:   2   3   4  19  20 
  Tagged Ports: None
  Uplink Ports: None
DualMode Ports: None

</syntaxhighlight>

virtual ethernet configuration

  • is the ip configuration of the vlan subnet

<syntaxhighlight lang=visualfoxpro >

interface ve 300

port-name v-secondary
ip access-group 300 in
ip address 1.2.1.1 255.255.255.240

! interface ve 100

port-name v-primary
ip address 1.2.3.1 255.255.252.0

</syntaxhighlight>

access list per IP

  • access list used by virtual ethernet

<syntaxhighlight lang=visualfoxpro >

access-list 10 permit 1.2.3.0 0.0.3.255 access-list 10 permit 1.2.1.0 0.0.0.255 access-list 10 deny any log

access-list 300 deny ip any 1.2.3.0 0.0.3.255 log access-list 300 deny ip any 1.2.1.0 0.0.0.255 log access-list 300 permit ip any any

access-list 103 permit ip any 1.2.5.0 0.0.0.255 </syntaxhighlight>

set DNS

  • add 3 DNS servers:

<syntaxhighlight lang=python > ip dns server-address 1.2.3.4 10.11.12.13 101.102.103.104 </syntaxhighlight>

  • del 1 DNS server:

<syntaxhighlight lang=python > no ip dns server-address 10.11.12.13 </syntaxhighlight>

SSH management config

<syntaxhighlight lang=visualfoxpro >

ip ssh  key-authentication no
ip ssh  source-interface ve 200

</syntaxhighlight>

add port to VLAN

<syntaxhighlight lang=visualfoxpro >

  • add tagged port:
# vlan 4
(vlan-4)# tag ethe 11
# end
  • add untagged port
(vlan-4)# untag ethe 11
# end

</syntaxhighlight>

remove port from VLAN

<syntaxhighlight lang=visualfoxpro >

  • remove un-tagged port:
#vlan 4
(vlan-4)# no untag ethe 11
# end
  • tagged port
(vlan-4)# no tag ethe 11
# end

</syntaxhighlight>