Devices and storage
From Alessandro's Wiki
HAL DAEMON - UDEV
- periferiche udev connesse
ls -lR /dev/disk
- molte informazioni su sdb
udevinfo -a -p /sys/block/sdb/
Ottenere informazione sul disco
elwood xunil # hdparm -I /dev/hda
/dev/hda:
ATA device, with non-removable media
Model Number: WDC WD2500JB-00FUA0 Serial Number: WD-WCAEP1091941 Firmware Revision: 15.05R15
Standards:
Supported: 6 5 4 Likely used: 6
Configuration:
Logical max current cylinders 16383 65535 heads 16 1 sectors/track 63 63 -- CHS current addressable sectors: 4128705 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 488397168 device size with M = 1024*1024: 238475 MBytes device size with M = 1000*1000: 250059 MBytes (250 GB)
Capabilities:
LBA, IORDY(can be disabled) Standby timer values: spec'd by Standard, with device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Recommended acoustic management value: 128, current value: 128 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * DOWNLOAD_MICROCODE SET_MAX security extension * Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test
Security:
supported not enabled not locked not frozen not expired: security count not supported: enhanced erase
HW reset results:
CBLID- above Vih Device num = 0 determined by the jumper
Checksum: correct