Router-language

From Alessandro's Wiki
Revision as of 14:04, 25 February 2012 by Xunil (talk | contribs) (Created page with " <syntaxhighlight lang=php > $ enable # config [te] (config)# (config)# (config)# show running-config (config)# write memory # </syntaxhighlight> * set ip dns server-addres...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


$ enable
# config [te]
(config)#
(config)# 
(config)# show running-config
(config)# write memory
#
  • set

ip dns server-address 195.169.98.130 195.169.98.169



  1. show interface brief

Port Link State Dupl Speed Trunk Tag Priori MAC Name 1 Up Forward Full 1G None No level0 0012.f286.... 2 Disable None None None None No level0 0012.f286....

Port Link State Dupl Speed Trunk Tag Priori MAC Name ve10 Up N/A N/A N/A None N/A N/A 0012.f286....

BR-SSH@coresw1#show mac-address Total active entries from all ports = 69 MAC-Address Port Type Index VLAN 0800.270c.ce47 5 Dynamic 30 113 0011.7800.9a44 8 Dynamic 14232 200


show rmon statistics Ethernet statistics 1 is active, owned by monitor

Interface 1 (ifIndex 1) counters
          Octets          62219423556
     Drop events                    0             Packets             74215428
  Broadcast pkts                  613      Multicast pkts                83808
CRC align errors                    0      Undersize pkts                    0
   Oversize pkts                    0           Fragments                    0
         Jabbers                    0          Collisions                    0
Packet size counters
              64              8199939           65 to 127             21283872
      128 to 255              2667477          256 to 511              1406813
     512 to 1023              2001555        1024 to 1518             38655772




BR-SSH@coresw1#show interface ethernet 1 GigabitEthernet1 is up, line protocol is up

 Hardware is GigabitEthernet, address is 0012.f286.7e40 (bia 0012.f286.7e40)
 Configured speed auto, actual 1Gbit, configured duplex fdx, actual fdx
 Configured mdi mode AUTO, actual MDI
 Member of L2 VLAN ID 10, port is untagged, port state is FORWARDING
 BPDU guard is Disabled, ROOT protect is Disabled
 Link Error Dampening is Disabled
 STP configured to ON, priority is level0
 Flow Control is config enabled, oper enabled, negotiation disabled
 mirror disabled, monitor disabled
 Not member of any active trunks
 Not member of any configured trunks
 No port name
 IPG MII 96 bits-time, IPG GMII 96 bits-time
 IP MTU 1500 bytes, encapsulation ethernet
 300 second input rate: 262016 bits/sec, 119 packets/sec, 0.02% utilization
 300 second output rate: 1558744 bits/sec, 178 packets/sec, 0.15% utilization
 35819040 packets input, 31760156880 bytes, 0 no buffer
 Received 559 broadcasts, 83280 multicasts, 35735201 unicasts
 0 input errors, 0 CRC, 0 frame, 0 ignored
 0 runts, 0 giants
 38293277 packets output, 30371035971 bytes, 0 underruns
 Transmitted 53 broadcasts, 0 multicasts, 38293224 unicasts
 0 output errors, 0 collisions


  1. show ip

Global Settings

 ttl: 64, arp-age: 10, bootp-relay-max-hops: 4
 router-id : 0.0.0.0
 enabled : UDP-Broadcast-Forwarding  Source-Route  Load-Sharing  RARP  
 disabled: Route-Only  Directed-Broadcast-Forwarding  IRDP  Proxy-ARP  RIP  DVMRP  VRRP  VRRP-Extended  

Static Routes

 Index   IP Address        Subnet Mask       Next Hop Router   Metric Distance
 1       0.0.0.0           0.0.0.0           145.145.24.140    1      1 0
 2       192.168.251.0     255.255.255.0     192.168.252.1     1      1 0



  1. show vlans

Total PORT-VLAN entries: 19 Maximum PORT-VLAN entries: 4095 PORT-VLAN 1, Name DEFAULT-VLAN, Priority level0, Spanning tree Off

Untagged Ports:   2   3   4  19  20 
  Tagged Ports: None
  Uplink Ports: None
DualMode Ports: None